The vape pen is a battery-operated device that turns liquid nicotine into vapor, which the user then inhales. The vape pen consists of three main parts: a cartridge filled with liquid nicotine or any other flavor, a heating element, and a battery. The battery supplies power to the heating element, thus vaporizing the liquid.
The vape pen wires carry electrical current from the battery to the heating element. To make them work properly, you must install the wires correctly and handle the vape pen’s current.
If the vape pen wires are not installed properly or cannot handle the current, they will not work correctly and may even be dangerous. Here are some methods on how to fix vape pen wires.
https://www.pexels.com/photo/person-holding-black-vape-3545426/
Tips On How To Fix Dab Pen Wires
Straighten The Wire
To fix a dab pen, the first step is straightening the wire. You can do this by gently pulling the wire until it is straight. If the wire is not too severely damaged, this should be enough to fix the issue. However, if the wire is severely damaged, it may need to be replaced.
In either case, it is essential not to damage the dab pen while trying to fix it. However, you can quickly fix most pens with patience and care. You can also wrap these wires around a power wire.
https://www.pexels.com/photo/man-holding-logic-vape-pen-11587603/
Replace The Wire
The dab pen wires come in several colors; the most prominent are green and white wires. Other colored wires include red and black wires or the ground wire. These can degrade over time due to heat exposure and general wear and tear, and it causes the vape pen to malfunction and produces an unpleasant taste.
One should replace the dab pen’s wire to fix them. Most dab pens use a standard kanthal wire, easily found at any vape shop. You just need to remove the old wire and install the new one, be careful not to over-tighten the screws.
Be careful while working with it since the coil and electrical wires are highly sensitive. The next step is heating coil placement for vaping. Once the new wire coil is in place, your vape pen should be as good as a new one and you would see the vape pen blinking three times.
https://www.pexels.com/photo/man-holding-logic-vape-pens-in-hands-11587598/
Rebuild The Coil
Nobody likes to use a broken vape pen, so fixing them before using is better. You will first need to remove the old coil to rebuild the wire coil. One can do this by unscrewing the base of the dab pen and then gently pulling the coil out.
Once you remove the old coil, you must clean the heating chamber and base of vape cartridge. Be sure to remove any old vape juice or residue that may be present.
Next, you will need to screw the new coil into the vape pen base. Make sure that the coil is tight and secure before moving on. Moreover, you can fix the coil wire using electrical tape.
https://www.pexels.com/photo/man-with-tattooed-arm-holding-logic-vape-pen-11587589/
How Do Professionals Fix These Devices?
If your vape pen is mildly damaged and only has a common issue, it is possible to fix it at home by yourself. However, if you notice significant damages, it is advised to visit a professional. These people are highly-trained and have complete knowledge about the product.
They use wire cutters and soldering iron. Then heat the soldering iron and dab it against a wire solder. They might also use a heat gun to warm the set up.
One might also try to use electronic devices to get rid of the damaged wire, including the red wire and black wire. However, fixing all the other wires that are connected to the vape pen in the same way.
People may also use products like isopropyl alcohol to remove wax and the coil from the heating chamber. These professionals also use the method of adjusting to unscrew different elements to get the desired results.
https://www.pexels.com/photo/person-wearing-jacket-holding-face-986729/
Why Is It Important To Fix A Broken Vape Pen?
Vaping has been gaining much attention because it is a healthier alternative to smoking. In addition to that, it is vital to use an e-cigarette that is in proper working condition as it will ensure that your vaping experience is a pleasant one.
That is why you must fix your damaged vape pen to get the most out of it. If these pens stop working, try adjusting the batteries, unscrew the coils connected to the pen, and use adjusting tool to gently pull out the pin.
https://www.pexels.com/photo/photography-of-a-man-using-vape-1005486/
Different Elements In A Vape Pen
Wire Coil
It is one of the most important part of an e-cigarette. It helps to heat the e-liquid in the tank and produce the vapor that one inhales.
Atomizer
It usually refers to the wick and coil within a vaping device. It draws the e-liquid from the tank to the coil.
Coils
A vape coil is a small spiral-shaped spring made of resistive wire that is wound around the wicking substance in your device. It is connected to the battery in your vape pen and held in position by an atomizer head.
https://www.pexels.com/photo/person-holding-an-electronic-vape-cigar-12971653/
Wrapping Up
If you are having trouble fixing the wire coil inside the vape pen, you can always take it to a professional. Additionally, if you do not have wire strippers, you can use a lighter to fix them. The professionals will be able to fix the wires for you in no time at all.
They will also be able to tell if there are any issues with the charger. However, if you want to avoid going to a professional, you can follow the tips provided in this article. By following these instructions, vapers can save their time and money by repairing their vape pens at home.
