As a former smoker, you may be curious about the wattage of vaping devices. Depending on your coil choice, the perfect balance of vapor and flavor is between 50 and 100 watts. This guide will cover common terminologies and how to choose the best device settings for your vaping experience.
How much power do you apply to your device, and at what rate is it critical to the essential operation of your electronic cigarette? Wattage control is available on all modern regulated devices, allowing you to set the maximum wattage (power) that your device will deliver to your atomizer/coil.
https://images.pexels.com/photos/3545426/pexels-photo-3545426.jpeg?auto=compress&cs=tinysrgb&w=600
How Does Wattage Affect Your Vape?
The more heightened the wattage on your vape device, the more vapor will be produced as the coil heats up and vaporizes more e-liquid.
Higher wattages are better for sub-ohm vaping and those seeking thicker, warmer vapor production. However, remember that vaping at a higher wattage will consume more e-liquid because more vaporizes with each hit.
However, before you crank up the wattage level to its maximum, you should check the highest recommended wattage range for your vape device. This should be written somewhere on the coil.
It is not advised to exceed the recommended wattage because your coil may burn out faster than expected, and you will need to replace them more often, which is both expensive and harmful if you repeatedly vape on a burnt coil.
If you prefer a more relaxed vape experience with less vapor produced, you can reduce the wattage on your device.
How Does Voltage Affect Your Device?
Voltage and wattage are inextricably linked. Wattage remains constant across all devices, tanks, and coils, so 10W on one vape coil will fire at 10W on another. Many devices today allow you to customize the voltage and wattage. So its range doesn’t affect the vaping device in any way.
If you use voltage, however, the power supplied will vary depending on the resistance of your vape coil. For example, 5v on a 1.8Ohm coil will produce approximately 13.5W of power, whereas 5v on a 0.5Ohm coil will produce around 48w.
Choosing Your Perfect Wattage
Vape wattage is a personal preference that significantly impacts your vaping experience. Whether you prefer thick cloud production due to high VG vape juice or intense hit of PG e-liquids, increasing the wattage will increase coil temperature settings and vaporization levels. It could lead to more vapor and arguably, more enjoyment.
Your preferred vaping wattage can be determined by your experience level, familiarity with your device, and the type of vaping experience you seek. Most closed pod devices are designed to mimic the sensations of smoking, pre-set at 7-15 watts.
When you consider that hundreds of devices on the market can reach up to 200W and beyond, it’s clear that 7-15 W is at the low end of the spectrum.
However, this does not imply that a low wattage is undesirable. Even 10 watts ensures a satisfying vape experience, which may be the ideal voltage for new vapers.
As you gain experience, it’s safe to say that vaping begins to excel between 40 and 50 watts. At these wattages, you’ll start noticing all of the nuances and subtleties in your e-liquid, allowing you to find the perfect vape flavors. Some of the other considerations are the density of the vapor and the throat hit.
Unsurprisingly, most vapers stick to 50W-75W wattage levels for daily vaping, only increasing it when they feel adventurous.
https://cdn.pixabay.com/photo/2018/05/23/08/48/vape-3423483_960_720.jpg
What Vape Wattage Has The Best Flavor?
Flavor sensation is affected not only by wattage and vape type but also by flavor. Generally, use lower wattage for bolder flavors like coffee and tobacco and higher for softer and fruity flavors like strawberry and peach.
https://cdn.pixabay.com/photo/2016/04/01/21/43/e-cigarette-1301670_960_720.jpg
What Wattage Should I Vape At 0.8 Ohm?
These single mesh coils have a resistance of 0.8 ohm and a wattage range of 12 – 18 watts, making them ideal for mouth-to-lung vaping.
What Wattage To Vape High VG?
Around 0.3 ohms is the sweet spot for achieving a go-to balance of vapor and flavor. Depending on your chosen coil, you should increase the wattage to between 50 and 100 watts. Some coils typically require more power to ramp up, so increase the wattage if you use them.
What Does Higher Wattage Do When Vaping?
One of the crucial things to keep in mind is that using your device’s highest wattage setting can be extremely dangerous if you don’t have the proper setup. Using the highest wattage with a coil designed for lower-wattage vaping.
For example, it will almost certainly burn out your coil immediately, which is a waste. Furthermore, if you use lower-capacity batteries, your battery life will be drastically reduced, forcing you to charge constantly.
What Are The Benefits Of Vaping At High Wattage?
Some of the benefits of vaping at high wattage are as follows:
Improved Throat Hit
Hotter hits provide a better throat hit, which is how the vapor feels when you take a hit. Consider vaping at a higher wattage if you enjoy feeling the smoke of your dry herbs when you take a draw.
The Vapor That Is Thicker And More Potent
Vaping at high wattages typically results in higher temperatures, so your device will produce more vapor faster. Thicker vapor is more potent, so vape at higher wattages if you want your weed to hit you quicker.
Running a vape coil at a higher wattage can produce more vapor, giving you more nicotine per puff. This also means the throat hit from your nicotine strength and PG will be stronger.
Hotter Vapor
Finally, you should vape at higher wattages if you prefer hotter hits. Because what wattage produces what temperatures vary from device to device, you may need to experiment to find the optimal high wattage setting.
Furthermore, high-wattage vaping has several advantages, such as increased vaporization and incredible flavor delivery.
Is It Harmful To Vape At Low Wattage?
To begin with, vaping at a low wattage has never been considered dangerous, ‘bad,’ or harmful. A low vape wattage indicates that you are vaping at a lower power level (and, therefore, less intense temperatures).
While this will increase your battery life and overall device life expectancy, lower burn temperature settings will result in less vaporization and a weaker vaping experience.
However, you will reach a cut-off point where a higher wattage begins to burn the vape juice, producing an off-putting ‘burn hit.’ At this point, you should reduce the wattage.
Tying It All Together: Vaping Wattage, Temperature Burn, And E-liquids
Vape mods are batteries with atomizers attached. The battery’s power heats the coil in the atomizer, vaporizing your juice and making it ready for use.
There is a strong relationship between wattage and ohms. Even the most powerful battery cannot achieve higher coil temperatures at any given coil’s maximum resistance capabilities.
https://cdn.pixabay.com/photo/2018/07/31/22/29/eliquid-3576069_960_720.jpg
Final Thoughts
Numerous factors help to determine the best wattage for any given individual to vape at. Your device will decide on your ideal wattage, the effect or feeling you want to achieve, the e-liquid you’re using, and practical considerations such as battery life. So it is vital for beginners to learn, How To Charge A Vape?
Once you’ve determined your device’s maximum and minimum wattage, you can play around with the wattage levels to achieve the exact flavor, vapor, and hit you prefer.
Determining the proper wattage may take some time, but it is an important part of vaping. With this testing, you’ll soon find yourself at the ideal wattage, enjoying every hit from the first to the last.